How To Install Window Blinds In Austin

Numerous Austin families opt for window blinds when they want more privacy and governance over daylight in their homes. They’re a useful and economical window treatment. Experienced DIYers may also install them in a couple of steps. Even so, nothing is better than choosing an expert window treatment installer. Here are the essential steps of installing window blinds and when you should contact the professionals to handle it for you.

Take Measurements And Mark Everything Precisely

Before you begin, determine if you want outside-mount or inside-mount blinds. This critical decision will tell you where to measure. Take measurements of the height, depth, and width on the inside of your frame for inside-mount installations. For outside-mount blinds, measure the width and height of your window, which includes the trim, and add three inches to each measurement to ensure adequate coverage. Measure exactly–refrain from rounding up or down. Ill-fitting blinds will not function smoothly.

Shop For Blinds

When you have your dimensions, you are ready to choose your blinds. You probably know what type of blinds you would like. Get blinds that coincide with your measurements as closely as possible. Ready-made blinds might not fit perfectly, either extending out too much or not meeting the end of the window entirely. Be sure to have fasteners that let your blinds attach at the proper depth, also. You’ll want to order custom-made blinds and hardware for a perfect fit.

Install Your Blinds

Your blinds should be accompanied by instructions. Adhere to them to attach your particular product. If you want a glimpse of how difficult it is to install window blinds in Austin, here is a summary of basic steps to provide a general idea.

 

Inside Mount Blinds

 

1. Put a bracket on the top of the inside of the window about one inch from the edge. Check that this placement won’t interfere with the blind’s operating mechanisms. Outline the bracket holes using a pencil.
2. Drill pilot holes on your marks.
3. Situate the bracket holes with your pilot holes and fasten with screws.
4. Repeat the initial three steps for the other bracket.
5. Snap the end caps onto the blind’s top rail. Fit the headrail into the brackets.

Connect the tilt wand and try it out. Additionally, evaluate the pull cord.

Outside Mount Blinds

1. Decide if you’re installing on the wall above the window or the window trim. Hold up the headrail and ensure the blind covers the bottom edge of the window.
2. Mark the outer edges of the headrail.
3. Measure four inches from each headrail mark and mark holes for the brackets.
4. Drill pilot holes in the proper spots.
5. Situate the brackets with your wall holes and secure with screws on both sides.
6. Slide the top rail into the brackets.

Connect the tilt wand and test out everything to make sure it works.

Pick The Simplest Way To Install Blinds 

As you know, you aren’t required to put up blinds by yourself. The simplest way to install window blinds in Austin is to seek out an expert window treatment installer. They will work with you at every step. They’ll help you select blinds that accommodate your needs, make accurate measurements for a custom-made product, and attach them for you. They do this daily, so they’ll complete your project swiftly and accurately. They will remedy any challenges without spending hours looking for help on websites. A window treatment installer will also have better-quality blinds than online or box stores.

Save Yourself The Trouble And Have Sunburst Shutters Install Your Window Blinds In Austin

Installing window blinds in Austin couldn’t be easier when you turn to Sunburst Shutters Austin. We’ll help you find made-to-order blinds that will suit your windows perfectly, and our skilled installation staff will put them up for you. All you must do is call 512-549-6077 or fill out the form below to arrange a no-cost in-home consultation.